PLDT Router Login
The key to managing, securing, and optimizing your home or office internet connection lies in the PLDT login. You can access and have complete control over your PLDT router, making the necessary adjustments to important network settings, including WiFi name (SSID), password, security measures, connected devices, bandwidth management, and advanced features like Superadmin and AdminPLDT.
PLDT (Philippine Long Distance Telephone Company) is among the most common internet service providers in the Philippines, providing DSL, Fibr, and wireless broadband services. All PLDT connections are accompanied by a router or modem-router bundle, which includes an in-built web interface. This interface gives the user control over their network without hiring professional technical support.
Whether it is your first time installing your router, only changing the WiFi password, or unlocking the advanced options, this guide walks you through it step by step, in the most straightforward, practical way. Check your remaining internet credits on the 10.0.0.0.1 piso wifi time page.
How to Log in to a PLDT Router?
It is not difficult to log in to your PLDT router, and you can access it on a computer or laptop, smartphone, or tablet. All one has to do is be within the PLDT network.
About PLDT Admin Login: Step-by-Step Guide
1. Connect to Your PLDT Network
Ensure that your device is either connected to your PLDT WiFi or to your router via a LAN (Ethernet) cable. You cannot log in to the page when you are not on the same network.
2. Open a Web Browser
Open any web browser, e.g., Google Chrome, Mozilla Firefox, Microsoft Edge, or Safari.
3. Enter the PLDT router IP address
Enter the address of the browser, 192.168.1.1, and press Enter.
4. Enter Username and Password
On the page that shows, you will have to enter your router username and password. Such information is commonly labeled as a sticker on the rear or bottom of the router.
5. Click Login
Once authenticated, you will be redirected to the PLDT router dashboard.
Problems and Solutions to Common Logins
The login page is not loaded: This can be fixed by using https://192.168.1.1 instead of http.
Your relation is not confidential: Click Advanced and continue.
Incorrect PLDT IP address: Some routers use 192.168.15.1 or 192.168.22.1.
Wrong credentials: Look into the router label.
Compare your Fibr settings with our Converge router login tutorial.
Default PLDT-Login, Username, Password, and IP Address
The default password to access a PLDT router varies by brand, model, and firmware. Most routers use common credentials, but some new routers have specific usernames and passwords to enhance security.
The following are the default PLDT router login credentials most commonly used.
Common PLDT Default Login Details
Router Type | Default IP Address | Username | Password |
PLDT DSL Router | 192.168.1.1 | admin | 1234 |
PLDT Home Fibr | 192.168.1.1 | adminpldt | 1234567890 |
Huawei PLDT Router | 192.168.1.1 | telecomadmin | admintelecom |
Fiberhome AN5506 Series | 192.168.1.1 | user | user1234 |
Zyxel PLDT Router | 192.168.1.1 | admin | 1234 |
Important: Always check the sticker on your router. Some PLDT routers use custom credentials that are unique to each device.
This IP is the standard for the TP-Link router login.
How to Change the PLDT WiFi Password and SSID?
One of the most crucial stages in securing your internet connection is changing your PLDT WiFi password and network name (SSID). The default Wi-Fi passwords are easy to guess and may expose your network to unauthorized users.
Steps to PLDT Change Password and Network Name
- To change your password, visit 192.168.1.1 PLDT change password page and log in as admin.
- Enter the PLDT router administrator usernames and password.
- Go to Network, Wireless, or WLAN Settings.
- Find the SSID Name field and provide a new WiFi name.
- When security Mode is selected, use either WPA2-PSK or WPA3 (preferred).
- Enter a strong password in the Passphrase or Pre-Shared Key field.
- Click Save or Apply to save changes.
- Reconnect all devices to the new Wi-Fi name and password.
How to make a strong PLDT WiFi Password
Always keep your PLDT WiFi password strong to prevent unauthorized access.
- Use at least 12 characters.
- Use both lower and uppercase lettering, numbers, and symbols.
- Do not use names, birthdays, or common words.
- Alter your password now and then.
PLDT Superadmin and Admin PLDT: How to log in?
PLDT routers have Superadmin and AdminPLDT as hidden or restricted access levels. Such interactive accounts enable users to access more features of the router that are not accessible in the conventional admin panel.
What Is PLDT Superadmin?
Superadmin account allows complete control of the router, such as:
- Discovering secret configuration settings.
- Enabling Web Admin Switch
- Changing advanced network configurations.
- Finding controls on firmware.
PLDT typically limits access to superadmin to prevent accidental misconfiguration, although it is still available on many router models.
Log in to PLDT Superadmin
The superadmin logins vary by router, brand, and version. The examples below are the most commonly used on different PLDT routers.
Example PLDT Superadmin Login Credentials
Router Model | Username | Password | Login URL |
Fiberhome AN5506 (2020 firmware) | fiberhomesuperadmin | sfuhgu | |
HG6245D (2020 firmware) | fiberhomesuperadmin | s(f)u_h+g | u |
Older Fiberhome Models | admin1234 | admin1234 |
These credentials may change after firmware updates. If they do not work, contacting PLDT support may be required.
How to Enable Web Admin Switch
To access AdminPLDT, you must first enable the Web Admin Switch:
Log in using Superadmin credentials
Go to Device Management
Select Debug Switch
Enable Web Admin Switch
Click Apply and log out
PLDT Admin PLDT Log-in Steps
Open your browser
Enter 192.168.1.1/fh in the address bar
Type in the username and password of AdminPLDT.
Click Login
Click Apply and log out Enter privileged router options.
For security reasons, PLDT may require you to change the default AdminPLDT password the first time you log in. Enter privileged router options.
Forgot Your PLDT Login? Here’s How to Reset It
It is common to forget the PLDT router login credentials, particularly when the username or password was changed so long ago. Unfortunately, the admin login cannot be retrieved directly from the router interface if you forget the password. You can only be sure that a factory reset is the answer.
The default settings of your router, such as the default username, password, WiFi name, and WiFi password, printed on the router label, will be restored to their original defaults with a factory reset.
How to Change Your PLDT Router Login Password
It should be done in the following steps:
Make sure that the Router is switched on.
Ensure that your PLDT router is plugged in and switched on.
Locate the Reset Button.
The reset button is usually located on the rear or the lower side of the router. It is a tiny pinpoint button marked as RESET.
Press and Hold the Reset Button.
Press the reset button with a paper clip or pin, then hold it for 10 to 15 seconds.
Wait until the Router Restarts.
Once the router lights start blinking, release the button. Let the router restart completely.
Reconnect With Default Credentials.
Connect to the default PLDT Wi-Fi network listed on the router sticker.
Log In Again.
Browse to 192.168.1.1 in your browser and enter the default username and password.
Important: A factory reset will delete all custom settings, including WiFi name, password, port forwarding rules, and parental controls.
PLDT Home Fibr Login Guide: How to manage your WiFi
PLDT Home Fibr is a superfast fiber-optic broadband service for modern households and heavy internet users. When using the PLDT Home Fibr router, you can log in to it to manage WiFi, secure the network, and effectively control networked devices.
The Significance of PLDT Home Fibr Login
Through the PLDT Home Fibr admin panel, you will be able to:
- Modify the WiFi name and password.
- Monitor connected devices
- Enable parental controls
- Manage bandwidth usage
- Improve security settings
- Maximize the performance of the router.
How to Log in to PLDT Home Fibr
Plug your device into the PLDT Home Fibr WiFi or LAN cable.
- Open a web browser
- Type 192.168.1.1 in the address bar
- Key in the login details (usually, the default is the adminpldt / 1234567890)
- To log in to the dashboard, click Login.
After logging in, go to Wireless Settings or Network Settings to manage your Wi-Fi and security preferences.
Best Practice: Once logged in.
- Always change:
- Default admin password
- Default WiFi password
- WiFi network name (SSID)
This avoids unauthorized access and secures your internet connection.
Smart security Tips to Keep Your PLDT WiFi Safe
It is essential to secure your PLDT WiFi network to ensure that personal information remains secure, unauthorized users do not access it, and internet performance does not slow down. Most users do not change the default settings, which can make the network insecure.
Critical WiFi security at PLDT
- Switch Default login credentials.
There is no secret in default usernames and passwords. Alter them as soon as they log in.
- Use Strong WiFi Encryption
Always choose the WPA2-PSK or WPA3 as your security Mode. Use outdated encryption methods, such as WEP.
- Switch off WPS (WiFi Protected Setup)
Attackers can use WPS. Turning it off is an additional security measure.
- Check Connected Devices regularly.
Keep track of the device connections and block the unknown devices.
- Update Router Firmware.
Software upgrades enhance security, eliminate bugs, and improve performance.
- Do Not Share your WiFi Password in Public.
Do not share your password with untrusted people, and update it regularly.
Quick Fixes for the Most Common PLDT WiFi Issues
Even with a trusted service provider like PLDT, users may experience issues with their Wi-Fi. There are basic troubleshooting steps to address common problems, as outlined below.
1. Restart Your PLDT Router
Rebooting a router eliminates any glitches and reinvigorates the connection.
- Turn off the router
- Wait 10–15 seconds
- Turn it back on and reconnect
2. Reboot Your Router to Improve Signals.
Place the router:
- In a central location
- Out of the thick walls and iron things.
- No appliances such as microwaves and TVs.
- This enhances the WiFi signals and range.
3. Test for Slack or broken Cables.
Ensure:
- Fiber cable or DSL cable is hardwired.
- LAN cables are not damaged
- The power adapter is functioning well.
Replacement of damaged cables would immediately restore functionality.
4. Update Router Firmware
Log in to the administration panel and check for any firmware updates. Refined firmware enhances performance, stability, and security.
5. Minimize the Number of devices to connect.
An excessive number of devices connected simultaneously may slow your network. Turn off the devices that are not used or reduce the bandwidth consumption of those that are not essential.
How to Access Your Router IP via Different Devices and Manage Settings
If 192.168.1.1 does not work, you can find your PIDT router IP address directly from your device settings.
Device | Steps to Find Router IP Address |
Windows PC or Laptop | 1. Press Windows + R, type cmd, and press Enter 2. Type ipconfig and press Enter 3. Look for Default Gateway 4. Enter that IP address into your browser |
macOS | 1. Click the Apple menu and open System Settings 2. Go to Network 3. Select your connected WiFi or Ethernet 4. Click Details or Advanced 5. Find the Router IP address 6. Enter it into your browser to log in |
Android Smartphones | 1. Go to Settings > WiFi 2. Tap your connected PLDT network 3. View network details 4. Look for Gateway or Router IP 5. Enter the IP in your browser |
iPhone or iPad (iOS) | 1. Open Settings > WiFi 2. Tap the (i) icon next to your network 3. Copy the Router IP address 4. Paste it into Safari or any browser |
FAQs
What is the 192.168.1.1 PLDT admin page?
Plug your device into PLDT WiFi, open a browser, enter 192.168.1.1 in the address bar, and log in using the admin credentials for your router.
How can I change the PLDT WiFi password?
To change the security key or passphrase, log in to the PLDT admin panel, navigate to Wireless Settings, and change the security key or passphrase in the security key or passphrase field, then save the changes.
Can I pay my PLDT bills online?
Yes, through its official portal and mobile application, as well as via GCash, Maya, and banking apps, PLDT offers the option to pay bills online.
What is the password of the super admin of PLDT HG6245D?
The superadmin passwords depend on the firmware version and can change after updates. If the default credentials fail, you should contact PLDT customer care.
How should I perform a factory reset on my PLDT router?
Hold the reset button on the router for 10-15 seconds until the lights start blinking, then leave the router to restart to its factory settings.
