Tenda Router Settings

Handling your home WiFi turns into much easier when you know how to log in to your Tenda router. The Tenda login page allows you to change the WiFi name, update the password, fix network issues, and save your connection.

Whether you are using a Tenda wireless router at home or in the office, the login process is straightforward. You simply need the correct Tenda IP address, your router’s default password, and a browser.

If you are managing a different network setup or need help accessing another router dashboard, you can also check the 1.0.0.0.1 Admin Login guide for step-by-step instructions.

In this article, you will learn every step clearly, and you can quickly access your Tenda admin panel without any confusion.

What is Tenda Login?

Tenda login is the process of starting your router’s admin page to control all your WiFi settings. When you enter the Tenda login IP address in your browser, you are taken to the dashboard, where you can change the WiFi name, update the password, enhance security, and control connected devices.

This panel is only for the router owner or admin, so it remains protected with a username and password.

Most Tenda routers use a default IP address like 192.168.0.1 or 192.168.1.1. When you enter this IP address in your browser, it unlocks the Tenda admin login page.

Default IP Addresses for Tenda Routers

Your router’s local IP address will generally match one of these defaults, except if you change it. Try 192.168.0.1 first; it works for the massive majority of Tenda models.

IP Address	Popularity
192.168.0.1	82%
192.168.2.1	9%
192.168.1.1	9%

Default Login Credentials for Tenda

If the admin page loads but the login does not work, the ISP may have set personalized credentials. A reset will restore the router to these default logins if they were adjusted.

Some Tenda models may redirect to the 192.168.100.1 admin login page, depending on your ISP configuration.

IP Address	Username	Password	Share
192.168.2.1	admin	admin	67%
192.168.2.1	admin	(blank)	31%
192.168.0.1	(none)	(none)	2%

How to Find Your Tenda Router IP

If the default Tenda IP does not work, you can smoothly find the correct IP address using the steps below. This will show the accurate IP address your Tenda router uses for login.

Method	Description
Check Router Label	Look at the back/bottom of your Tenda router — the login IP is printed on the sticker.
Check Device Network Settings	On your phone or laptop, look for the Gateway or Router IP in the network details.
Windows (Command Prompt)	Open CMD → type ipconfig → find Default Gateway.
Mac (System Settings)	Go to System Settings → Network → Advanced → TCP/IP → check Router.

Tenda Login Steps

Connect to Your Tenda Network

earlier than you can open your router’s settings, your device needs to be connected to the Tenda network.
You can do this in two ways

WiFi connection: Select your Tenda WiFi name and enter the WiFi password.
LAN cable: Connect an Ethernet cable from the router to your computer, no password required.

If you are not connected, the login page will simply not load. And if you need access remotely at any point, a VPN can help, but for most people, connecting locally is quickest.

Open Your Browser

Once you are connected, open a web browser such as Chrome, Edge, or Safari, and enter the router’s IP address in the address bar. Try 192.168.0.1 first.t If that doesn’t work, try 192.168.2.1

Press enter, and the page will switch to the Tenda login screen. If you are doubtful which IP your router actually uses, just preview at:

The sticker on the router
Your device’s network info (look for “Default Gateway”)
Windows → ipconfig
Mac → Network → TCP/IP

Log In With the Default Details

Different Tenda models use different defaults, but common options include

admin/admin
(blank username) / (blank password)

If you changed the password earlier, use your recent one.
IF Nothing works, don’t panic. You can reset the router by pressing the tiny reset button for a few seconds.

That brings everything back to factory Mode so that you can log in again.
But don’t forget to change the login password after so nobody else can slip in.

Customize Your Router Like a Pro

Once you are within the Tenda dashboard, you can adjust your network however you like. The interface works like a simple control panel.

Some of the settings you can make here are:

You can set up a static IP for your router
Set up a new WIFI name or password
Set up a firewall
Open the ports for specific communication

Additional tip: If you change something and your internet suddenly says goodbye, it helps to have the original settings noted down so you can return quickly.

How to Fix Tenda Router Login Page Issues

These quickly solve the issue and help you open the Tenda login page easily.

Make sure your device is connected to the Tenda WiFi or LAN cable.

Try all shared Tenda IP addresses, such as 192.168.0.1, 192.168.1.1, or 192.168.10.1.

Remove "https://" and type the IP directly without extra text.

Restart the router to refresh the network.

Change the browser if the page still doesn't load.

Disable VPN because it can block router login pages.

Reset router if you still cannot access the admin panel.

If the default IP doesn’t work, try accessing the 10.0.0.10 router login, which is commonly used in customized network setups.

How to Change Tenda Login Password

Changing your Tenda router login password is essential to keep your network secure. Follow these easy steps. After this, your Tenda router admin panel will need the new password for all future logins.

Log in to the Tenda Admin Panel using the default IP and credentials.
Go to System Settings or Administration (depending on your router model).
See for Password Settings or Change Admin Password.
Enter the old password, then type your new password.
Confirm the new password by reentering it.
Click Save or execute to update the login password.

How to Change Tenda WiFi Password

Updating your Tenda WiFi password helps secure your network and stop unauthorized access. This ensures only authorized users can access your Tenda WiFi.

Log in to the Tenda Admin Panel using the router IP and admin credentials.
Go to Wireless Settings or WiFi Settings.
Discover the Wi-Fi password or the Wireless security section.
Type a new strong password for your WiFi network.
Click Save or Apply to confirm the changes.
Reconnect all devices through the new WiFi password.

If you’re using a different provider at home, you may also want to check this PLDT router login for step-by-step access instructions.

Recommended Tenda Routers for 2026

Model	Type	Why Popular in 2026
AC10	Dual-Band Router	Fast, stable, great for home use
AC11	Dual-Band Router	Strong coverage, budget-friendly
AC15 (AC1900)	High-Speed Router	Good for gaming & streaming
AC18 (AC1900)	High-Speed Router	Powerful signal, gigabit speeds
AC6 / AC6 V2	Dual-Band Router	Affordable & reliable
AC5	Basic Dual-Band	Good for small homes
N301	Single-Band Router	Simple & cheap for basic use
N300 / N300v3	Single-Band Router	Prevalent older model
F3	Budget Router	Easy setup, good range for price
F1200	Dual-Band Router	Faster WiFi on a budget
Nova MW3	Mesh WiFi	Whole-home coverage
Nova MW5 / MW5s	Mesh WiFi	For larger houses
Nova MW6	Mesh WiFi	Best coverage in the Tenda lineup
4G300	4G SIM Router	Works with SIM cards, portable
4G600	4G SIM Router	Stronger 4G model for home use

Converge subscribers can follow these Converge router login instructions if they are managing a different router model.

FAQs

Most Tenda routers use 192.168.0.1 or 192.168.1.1 as the default login IP.

Yes, go to System Settings in the admin panel, choose Change Password, and set a new password.

What is the default username and password for Tenda routers?

The default username is usually admin, and the password is admin or sometimes left blank.

How do I change my Tenda WiFi password?

Check your connection, use the correct IP address, restart the router, clear your browser cache, or try a different browser.

How can I reset my Tenda router if I forget the password?

Press and hold the reset button on the router for 10 to 15 seconds, then release it to reboot.

Final thoughts

When you have the correct IP address, username, and password, logging into your Tenda router is effortless. You can easily edit your WiFi name, change passwords, boost security, and regulate connected devices by having access to the Tenda admin dashboard.

Always keep your login credentials safe and update your passwords regularly to protect your network. Following this guide step by step ensures smooth access to your Tenda router and a secure, fast Wi-Fi experience at home or in the office.